{"product_id":"grou-34","title":"Dyna Winter White Unsanded Grout 25lbs GROU-34","description":"\u003ch3 class=\"_qaQP6rvk _2yOmh_Dy\" data-id=\"_2yOmh_Dy\"\u003e\u003cspan class=\"_VWvqNvR9 _LZKnHNDZ _title _3JdPm85O\" data-id=\"_LZKnHNDZ\"\u003eDESCRIPTION\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp class=\"_7XqAY8_A _YkJ7hGEj\" data-id=\"_YkJ7hGEj\"\u003e\u003cspan class=\"_VWvqNvR9 _ABpjhkmN _text _ZGwmb_O6\" data-id=\"_ABpjhkmN\"\u003eA premium performance pre-mixed (unsanded) polymer-modified Portland cement tile grout that only requires the addition of water for mixing. DYNA® DYNACOLOR 1000 is used for non-vitreous ceramic glazed wall tiles and is available in a broad range of colors.\u003cbr\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 class=\"_qaQP6rvk _2MOmh9DM\" data-id=\"_2MOmh9DM\"\u003e\u003cspan class=\"_VWvqNvR9 _LBKnHMDB _title _3JdPm85O\" data-id=\"_LBKnHMDB\"\u003eUSES\u003c\/span\u003e\u003c\/h3\u003e\n\u003col\u003e\n\u003cli class=\"_7XqAY8_A _ngOqhQ4A\" data-id=\"_ngOqhQ4A\"\u003e\u003cspan class=\"_VWvqNvR9 _Wb9ohRJq _text _ZGwmb_O6\" data-id=\"_Wb9ohRJq\"\u003eTo be used to grout interior and exterior wall tile surfaces.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli class=\"_7XqAY8_A _ngOqhQ4A\" data-id=\"_ngOqhQ4A\"\u003e\u003cspan class=\"_VWvqNvR9 _Wb9ohRJq _text _ZGwmb_O6\" data-id=\"_Wb9ohRJq\"\u003eFor grouting glazed ceramic wall tiles.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli class=\"_7XqAY8_A _ngOqhQ4A\" data-id=\"_ngOqhQ4A\"\u003e\u003cspan class=\"_VWvqNvR9 _Wb9ohRJq _text _ZGwmb_O6\" data-id=\"_Wb9ohRJq\"\u003eFor grouting marble tile surfaces.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli class=\"_7XqAY8_A _ngOqhQ4A\" data-id=\"_ngOqhQ4A\"\u003e\u003cspan class=\"_VWvqNvR9 _Wb9ohRJq _text _ZGwmb_O6\" data-id=\"_Wb9ohRJq\"\u003eFor grouting narrow joints 1.5 mm (1\/16”) to 3 mm (1\/8”) wide.\u003cbr\u003eFor joints greater than 3 mm (1\/8”) us Dyna DynaColor 2000 Grouts\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch3\u003e\u003cspan class=\"_VWvqNvR9 _Wb9ohRJq _text _ZGwmb_O6\" data-id=\"_Wb9ohRJq\"\u003eADVANTAGES\u003c\/span\u003e\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003e\u003cspan class=\"_VWvqNvR9 _Wb9ohRJq _text _ZGwmb_O6\" data-id=\"_Wb9ohRJq\"\u003e\u003cspan\u003eEASY TO HANDLE\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003ePlastic, workable, and glides on. One-part system, no need to add liquid latex admixture. \u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e2. PREMIUM PERFORMANCE\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eHigh compressive strength, abrasion resistance and flexibility. Impact and vibration resistant. Freeze \/ thaw resistant.\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e3. VERSATILE\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eIdeal for residential, commercial and industrial applications. For exterior and interior.\u003c\/span\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch2 style=\"text-align: center;\"\u003e\u003cstrong\u003e\u003cspan class=\"_VWvqNvR9 _Wb9ohRJq _text _ZGwmb_O6\" data-id=\"_Wb9ohRJq\"\u003eMix the Grout Powder to Water In the Following Proportions\u003c\/span\u003e\u003c\/strong\u003e\u003c\/h2\u003e\n\u003ctable class=\"aligncenter\" border=\"1\" width=\"80%\" align=\"center\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth width=\"50%\" align=\"center\" valign=\"middle\" bgcolor=\"#E4E4E4\" scope=\"col\"\u003e\u003cstrong\u003eWater\u003c\/strong\u003e\u003c\/th\u003e\n\u003cth width=\"50%\" align=\"center\" valign=\"middle\" bgcolor=\"#E4E4E4\" scope=\"col\"\u003e\u003cstrong\u003eGrouting Compound\u003c\/strong\u003e\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd align=\"center\" valign=\"middle\"\u003e750 ml (25 US oz.)\u003c\/td\u003e\n\u003ctd align=\"center\" valign=\"middle\"\u003e2.2 kg (5 lbs.)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd align=\"center\" valign=\"middle\"\u003e1.88 L (50 US oz.)\u003c\/td\u003e\n\u003ctd align=\"center\" valign=\"middle\"\u003e11.3 kg (10 lbs.)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd align=\"center\" valign=\"middle\"\u003e3.78 L (120 US oz.)\u003c\/td\u003e\n\u003ctd align=\"center\" valign=\"middle\"\u003e22.7 kg (50 lbs.)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3 class=\"_qaQP6rvk _ezWbhBWM\" data-id=\"_ezWbhBWM\"\u003e\u003cspan class=\"_VWvqNvR9 _Vx0WHMOr _title _3JdPm85O\" data-id=\"_Vx0WHMOr\"\u003eDIRECTIONS\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch4 class=\"_qaQP6rvk _4y6Rhmrz\" data-id=\"_4y6Rhmrz\"\u003e\u003cspan class=\"_VWvqNvR9 _kB6vHDgx _title _3JdPm85O\" data-id=\"_kB6vHDgx\"\u003eA. SURFACE PREPARATION\u003c\/span\u003e\u003c\/h4\u003e\n\u003cp position=\"absolute\" left=\"50%\" margin-left=\"-580px\" class=\"_7XqAY8_A _mgqGhq2j\" data-id=\"_mgqGhq2j\"\u003e\u003cspan class=\"_VWvqNvR9 _kq_ohyjb _text _ZGwmb_O6\" data-id=\"_kq_ohyjb\"\u003e1. Ensure that the tiles are firmly set and the mortar or adhesive is completely dry.\u003cbr\u003e2. Remove all spacers, pegs, ropes or strings.\u003cbr\u003e3. Ensure that the grout joints are clean and free or dust, dirt, foreign matter or water. Clean the surface or the tile or stone surface thoroughly to remove any dust, dirt, grime or any other contaminants which may discolor the grout. Use DYNA brand of cleaners.\u003cbr\u003e4. Remove excess and residual mortar or adhesive from the joints so that 2\/3 of the depth of the tile is available for grouting.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch4 class=\"_qaQP6rvk _ly_5h8_z\" data-id=\"_ly_5h8_z\"\u003e\u003cspan class=\"_VWvqNvR9 _Nx10Hqbr _title _3JdPm85O\" data-id=\"_Nx10Hqbr\"\u003eB. MIXING\u003c\/span\u003e\u003c\/h4\u003e\n\u003col\u003e\n\u003cli position=\"absolute\" left=\"50%\" margin-left=\"-580px\" class=\"_7XqAY8_A _qAvZhwZa\" data-id=\"_qAvZhwZa\"\u003e\u003cspan class=\"_VWvqNvR9 _6BJVhGnq _text _ZGwmb_O6\" data-id=\"_6BJVhGnq\"\u003eBefore mixing the grout, dry blend the grout in order to avoid color variations in the finished grout. If two or more packages of grout are used dry blend all the contents together.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli position=\"absolute\" left=\"50%\" margin-left=\"-580px\" class=\"_7XqAY8_A _qAvZhwZa\" data-id=\"_qAvZhwZa\"\u003e\u003cspan class=\"_VWvqNvR9 _6BJVhGnq _text _ZGwmb_O6\" data-id=\"_6BJVhGnq\"\u003eUse a clean mixing vessel and a slow speed mixer (approximately 150 R.P.M.).\u003c\/span\u003e\u003c\/li\u003e\n\u003cli position=\"absolute\" left=\"50%\" margin-left=\"-580px\" class=\"_7XqAY8_A _qAvZhwZa\" data-id=\"_qAvZhwZa\"\u003e\u003cspan class=\"_VWvqNvR9 _6BJVhGnq _text _ZGwmb_O6\" data-id=\"_6BJVhGnq\"\u003e Use cool clean water for mixing. Do not mix grout with other additives. Pour the required amount of water first into the mixing vessel and gradually add in the grout powder while mixing. To avoid shade variations of the finished grout always add the grout powder to the water and be consistent in the mixing process. Ensure that you use a consistent amount of water from batch to batch. As a guideline mix the grout powder to water in the following proportions:\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp position=\"absolute\" left=\"50%\" margin-left=\"-580px\" class=\"_7XqAY8_A __j0ph1ok\" data-id=\"__j0ph1ok\"\u003e\u003cspan class=\"_VWvqNvR9 _lb0rhMwN _text _ZGwmb_O6\" data-id=\"_lb0rhMwN\"\u003eMix thoroughly until you achieve a smooth and homogeneous stiff paste consistency and that a uniform shading of color is obtained.\u003cbr\u003e\u003cbr\u003e4. Avoid prolonged mixing which will shorten pot life and cause air entrapment.\u003cbr\u003e5 Allow the grout to slake for about 10 minutes.\u003cbr\u003e6. After the grout has slaked remix without adding anymore grout powder or liquid.\u003cbr\u003e7. Some stiffening of the grout may occur before all the grout is used (approximately 1 hour). If this occurs merely remix the grout but do not add any more liquid.\u003cbr\u003e8. Wash your mixing tools with water immediately after mixing.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp position=\"absolute\" left=\"50%\" margin-left=\"-580px\" class=\"_7XqAY8_A __j0ph1ok\" data-id=\"__j0ph1ok\"\u003e \u003c\/p\u003e\n\u003ch4 class=\"_qaQP6rvk _Vyq0hAOy\" data-id=\"_Vyq0hAOy\"\u003e\u003cspan class=\"_VWvqNvR9 _mBqLH04r _title _3JdPm85O\" data-id=\"_mBqLH04r\"\u003eC. APPLICATION \u003c\/span\u003e\u003c\/h4\u003e\n\u003cp position=\"absolute\" left=\"50%\" margin-left=\"-580px\" class=\"_7XqAY8_A _1aDBhVbA\" data-id=\"_1aDBhVbA\"\u003e\u003cspan class=\"_VWvqNvR9 _QqEKhKOb _text _ZGwmb_O6\" data-id=\"_QqEKhKOb\"\u003e1. To assist in the wetting and spreading of the grout, slightly moisten the tile or stone surface with a damp sponge but do not leave excess moisture. Do not permit the un-grouted joints to flood with excess water.\u003cbr\u003e2. Press the grout into the joints with a rigid rubber float.\u003cbr\u003e3. Ensure that all the joints are well compacted and free of gaps and voids.\u003cbr\u003e4. The grout surface should be flush with the tile edge. Remove excess grout from the tile surface, moving the float diagonally to the joints while the grout is still fresh.\u003cbr\u003e5. Ensure that you use consistent application procedures throughout the entire installation surface in order to produce consistent results.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch4 class=\"_qaQP6rvk _No13hLlz\" data-id=\"_No13hLlz\"\u003e\u003cspan class=\"_VWvqNvR9 _2jn7HERj _title _3JdPm85O\" data-id=\"_2jn7HERj\"\u003eD. EXPANSION AND CONTROL JOINTS\u003c\/span\u003e\u003c\/h4\u003e\n\u003cp position=\"absolute\" left=\"50%\" margin-left=\"-580px\" class=\"_7XqAY8_A _zkzBhYDa\" data-id=\"_zkzBhYDa\"\u003e\u003cspan class=\"_VWvqNvR9 _j3jWhwGq _text _ZGwmb_O6\" data-id=\"_j3jWhwGq\"\u003e1. Provide expansion and control joints where specified.\u003cbr\u003e2. Do not cover, bridge or fill any expansion joints with grouting compound.\u003cbr\u003e3. Cut tiles on both sides along the edges of the expansion joints.\u003cbr\u003e4. Insert the specified compressible bead and sealant to caulk the expansion and control joint.\u003cbr\u003e5. Follow ANSI AN 3.8, “Requirements for Expansion Joints“.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch4 class=\"_qaQP6rvk _Ldv6h5Ez\" data-id=\"_Ldv6h5Ez\"\u003e\u003cspan class=\"_VWvqNvR9 _OZzMHJaZ _title _3JdPm85O\" data-id=\"_OZzMHJaZ\"\u003eE. GROUTING \u003c\/span\u003e\u003c\/h4\u003e\n\u003cp position=\"absolute\" left=\"50%\" margin-left=\"-580px\" class=\"_7XqAY8_A __j3EhJ1a\" data-id=\"__j3EhJ1a\"\u003e\u003cspan class=\"_VWvqNvR9 _mbeYh6j3 _text _ZGwmb_O6\" data-id=\"_mbeYh6j3\"\u003eDo not walk over, grout or disturb the tiles for at least 48 hours after the installation. Use DYNACOLOR grouts when grouting.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch4 class=\"_qaQP6rvk _4oZEhPRy\" data-id=\"_4oZEhPRy\"\u003e\u003cspan class=\"_VWvqNvR9 _4r4vHl9x _title _3JdPm85O\" data-id=\"_4r4vHl9x\"\u003eF. CLEANING\u003c\/span\u003e\u003c\/h4\u003e\n\u003cp position=\"absolute\" left=\"50%\" margin-left=\"-580px\" class=\"_7XqAY8_A _ma9ohxrg\" data-id=\"_ma9ohxrg\"\u003e\u003cspan class=\"_VWvqNvR9 _obrLhRkB _text _ZGwmb_O6\" data-id=\"_obrLhRkB\"\u003e1. Permit the grout to firm up in the joints for about 15 to 30 minutes to prevent damage to the grout surface. If high humidity and low temperatures are present more time will be required.\u003cbr\u003e2. Use two buckets of clean water, the first for rinsing the grout residue from the cleaning towel and the second for moistening the cleaning towel in clean water.\u003cbr\u003e3. Wet a towel and rinse all excess water. Pull with gentle motion the flat damp towel diagonally across the surface of the tiles or stone, to remove the remaining grout residue and to smooth the surface of the grout joints. Perform this procedure by repeatedly washing and wringing out the towel. Do not use a sponge. Never use excess force as this may scratch the tile surface or damage the grout joints.\u003cbr\u003e4. Change the water in the buckets frequently to prevent the development of a haze or film on the tile or stone surface.\u003cbr\u003e5. Do not use excess water as this will cause efflorescence, discoloration, inconsistency, and soft or powdery grout joints.\u003cbr\u003e6. To remove efflorescence, rebuff the tile and grout surface one to two hours afterward with a clean, dry, and lint free cloth to remove any excess surface water or grout residue.\u003cbr\u003e7. Clean hands and tools with clean water.\u003cbr\u003e8. After the grout has initially cured, to facilitate grout film removal use a recommended brand of DYNA grout film remover.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch4 class=\"_qaQP6rvk _QogNhKno\" data-id=\"_QogNhKno\"\u003e\u003cspan class=\"_VWvqNvR9 _yZveH6Kx _title _3JdPm85O\" data-id=\"_yZveH6Kx\"\u003eG. PROTECTION AND CARE\u003c\/span\u003e\u003c\/h4\u003e\n\u003col\u003e\n\u003cli position=\"absolute\" left=\"50%\" margin-left=\"-580px\" class=\"_7XqAY8_A _9koEhYmg\" data-id=\"_9koEhYmg\"\u003e\u003cspan class=\"_VWvqNvR9 _kB60h56N _text _ZGwmb_O6\" data-id=\"_kB60h56N\"\u003eProvide for dry, heated storage on site and deliver materials at least 24 hours before tile work begins.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli position=\"absolute\" left=\"50%\" margin-left=\"-580px\" class=\"_7XqAY8_A _9koEhYmg\" data-id=\"_9koEhYmg\"\u003e\u003cspan class=\"_VWvqNvR9 _kB60h56N _text _ZGwmb_O6\" data-id=\"_kB60h56N\"\u003eProtect tile-work from freezing and complete water immersion for at least 28 days after the completion of the work performed.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli position=\"absolute\" left=\"50%\" margin-left=\"-580px\" class=\"_7XqAY8_A _9koEhYmg\" data-id=\"_9koEhYmg\"\u003e\u003cspan class=\"_VWvqNvR9 _kB60h56N _text _ZGwmb_O6\" data-id=\"_kB60h56N\"\u003eDo not walk on the tiles for at least 48 hours after the installation. Plywood stepping boards may be used after 24 hours when it is unavoidable to occasionally step on the floor. Do not permit heavy traffic to pass on the tiles for at least 7 days after the installation. Protect walls from impact, heavy hammering and vibration on opposite and adjacent walls for at least 14 days after installation.\u003cbr\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003cli position=\"absolute\" left=\"50%\" margin-left=\"-580px\" class=\"_7XqAY8_A _9koEhYmg\" data-id=\"_9koEhYmg\"\u003e\u003cspan class=\"_VWvqNvR9 _kB60h56N _text _ZGwmb_O6\" data-id=\"_kB60h56N\"\u003eWhen working in cold temperatures or high humidity protect the tile-work for an extended period of time to permit the grout to adequately cure before you permit traffic to walk on the tiles. \u003c\/span\u003e\u003c\/li\u003e\n\u003cli position=\"absolute\" left=\"50%\" margin-left=\"-580px\" class=\"_7XqAY8_A _9koEhYmg\" data-id=\"_9koEhYmg\"\u003e\u003cspan class=\"_VWvqNvR9 _kB60h56N _text _ZGwmb_O6\" data-id=\"_kB60h56N\"\u003eTo properly care for your grouting joints use a recommended brand of DYNA cleaner.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli position=\"absolute\" left=\"50%\" margin-left=\"-580px\" class=\"_7XqAY8_A _9koEhYmg\" data-id=\"_9koEhYmg\"\u003e\u003cspan class=\"_VWvqNvR9 _kB60h56N _text _ZGwmb_O6\" data-id=\"_kB60h56N\"\u003eTo ensure increased protection and life of your grouting joints use a recommended brand of DYNA sealer.\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ol\u003e","brand":"Dyna","offers":[{"title":"Default Title","offer_id":52968714338613,"sku":"GROU-34","price":3499.99,"currency_code":"JMD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2680\/8698\/files\/Dyna-Metro-Grout-Colours_28669df5-337e-4ca0-b00f-5857d10404cd.jpg?v=1780768199","url":"https:\/\/totalhardwareja.com\/products\/grou-34","provider":"Total Hardware \u0026 Supplies","version":"1.0","type":"link"}