Harris Ford Red Engine Enamel Spray Paint 11oz H-38125

• Brilliant Metal Finish
• Resists up to 500° F (260°C)
• Quick Drying
• Comfort Tip
• MADE in U.S.A

Preparation:

Thoroughly clean all grease, oil, dirt, wax and rust scale from surface before painting

New Metal Surface: 

New or rusted areas should be primed with Aerosol Primer before painting

Surfaces in Poor Conditions:

Remove all rust and peeled or blistered paint to restore back to sound surface. Then, applied in all surfaces the Gray Primer allow 30 min. to dry.

Directions:

1. Remove loose paint and rust with a wire brush or sandpaper. (lightly sand glossy surfaces)
2. Clean with soap and water, then rinse and let dry.
3. Use outdoor or in well ventilated area with temperatures above 50°F (10°C) and humidity is below 85% to ensure proper drying
4. Avoid spraying in windy area to prevent spray mist. Protect surounding area by covering with paper and/or cloth
5. Shake can for one minute vigorously after mixing ball begins to rattle. (Shake often during use)
6. Hold Can upright 12"-16" from surface and spray in a steady back and forth motion, slightly overlapping each stroke. 
7. When finished spraying, clear spray valve by turning can upside down and pushing sprray button for 5 seconds.

CAUTION
Do not burn or place in home trash compactor.