DynaFlor 300 Thinset 50lb

• Origin: Jamaica
• Brand: Dyna
• Color: Grey
• Size: 50 Pounds
• Coverage: 75 square Feet

Advantages
▪ Easy to Handle: Plastic, workable, glides on, non-sagging, long open time and increased
tile adjustability.
▪ High Bond Strength: Greater than 200% stronger than mastic type adhesives.
▪ Versatile: Lower material and labour costs than conventional Portland cement mortar
beds.

Limitations
1. Do not use over presswood, particle board, Masonite, chipboard, laun, asbestos board,
gypsum floor patching compounds, metal glass, plastic or any unstable
materials which are deemed unsuitable substrates.
3. Do not use in temperatures below 50°F (10°C) or above 104°F (40°C).
4. Keep the area of installation from freezing for at least 28 days after application.

Surface Preparation
All substrates must be to the recommended tolerances of ANSI A108.5 for dry-set mortar
installations. The substrates must be structurally sound, solid, stable, dry, clean and free of
grease, oil, paint, dust, tar, wax, curing agent, primer, sealer, or any other substances which
may prevent or reduce the adhesion of this product. Painted surfaces must be completely
sanded, scraped, or chipped to promote adhesion. 

Main Application
Use of a recommended notched trowel with adequate depth to achieve a 100% mortar
contact, after beat-in, to the back of the tiles is recommended. Using the flat edge of the
trowel, spread a thin coat over the substrate. Then apply additional material and comb the
mortar with the notched side of the trowel.

Grouting
Do not walk over, grout or disturb the tiles for at least 48 hours after the installation. 

Cleaning
Wash your tools immediately after mixing. Clean your hands and tools with water while the
mortar is wet.